SMO-KING™ 10″ Digital Heatpad Suitable Vacuum For Chamber Extraction Systems

710Vacs Silicone Heat Pad & Digital Controller

United Kingdom/Europe 220V supply
Supplied with UK 3 pin plug.

Select size of Pad from drop down menu

The 710Vacs Heat Pad has a fast heat up time and unform temerature across its durable surface. The digital controller allows for accurate temperature adjustment. The controller case is of a silicone rubber contruction for insulation resistance to chemicals.

The Pad adheres safely to your vacuum chamber.

The digital heater is super accurate, and will hold a temp within a degree (depending on the environment and air movement). The heater includes full instructions to operate.

Specification:

Voltage: 220V Power: 160W
Temperature range: 30 ℃ -150 ℃ [adjustable] Power cord length: 1.5 m
Digital Control: Increments of 1 Degree.
Accuracy: +/- 0.2 Degrees
Relay Lifespan: Approx. 10 million cycles
Heat Pad will adhere to the bottom of your chamber.

Instructions for use

1. Clean the surface of the item. ensure that the surface is clean.
2. Peal double-sided adhesive to the surface of the one to be heated, ensure tight fit securely, no bubbles.
3. Plug the power connector
4. Temperature regulation. pressing the “set” button, the screen flashes to display the set temperature; press the △ or ▽ key to adjust the value to the desired temperature, the thermostat memory storage. then press the“set” again to exit the adjustment status and it will display real-time temperature. If not press any key, it will automatically exit after ten seconds and display real-time temperature

NB The controller has a temperature buffer. Allow to innitially buffer and settle before adjusting the set temperature. Anything you attach a heat pad to will act like a heat sink. So the set temperature will be different from the actual inside temperature.